notes.from.lv

Šī lapa ir tikai lasāma. Vari apskatīt izejas kodu, bet nevari to mainīt. Ja domā, ka tas nav pareizi, vaicā administratoram.
====== OpenVPN servera instalācija ======

Šajā rakstā aprakstīts OpenVPN servera instalēšanas process uz Linux. VPN lietotāju datu glabāšana notiek MySQL datu bāzē.

Testēts: Ubuntu 12.04 LTS.

====== MySQL datu bāze ======


1. [[linux:mysql-instalesana-un-datu-bazes-izveide|Instalējam MySQL serveri. Izveidojam datubāzi "openvpn", atbilstošu lietotāju, un piešķiram tiesības.]]

2. Izveidojam datu bāzes tabulas un aizpildam ar datiem.

''user'' tabula
<code>
CREATE TABLE IF NOT EXISTS `user` (
    `user_id` varchar(32) COLLATE utf8_unicode_ci NOT NULL,
    `user_pass` varchar(32) COLLATE utf8_unicode_ci NOT NULL DEFAULT '1234',
    `user_mail` varchar(64) COLLATE utf8_unicode_ci DEFAULT NULL,
    `user_phone` varchar(16) COLLATE utf8_unicode_ci DEFAULT NULL,
    `user_online` tinyint(1) NOT NULL DEFAULT '0',
    `user_enable` tinyint(1) NOT NULL DEFAULT '1',
    `user_start_date` date NOT NULL,
    `user_end_date` date NOT NULL,
PRIMARY KEY (`user_id`),
KEY `user_pass` (`user_pass`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;
</code>

''log'' tabula
<code>
CREATE TABLE IF NOT EXISTS `log` (
    `log_id` int(10) unsigned NOT NULL AUTO_INCREMENT,
    `user_id` varchar(32) COLLATE utf8_unicode_ci NOT NULL,
    `log_trusted_ip` varchar(32) COLLATE utf8_unicode_ci DEFAULT NULL,
    `log_trusted_port` varchar(16) COLLATE utf8_unicode_ci DEFAULT NULL,
    `log_remote_ip` varchar(32) COLLATE utf8_unicode_ci DEFAULT NULL,
    `log_remote_port` varchar(16) COLLATE utf8_unicode_ci DEFAULT NULL,
    `log_start_time` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,
    `log_end_time` timestamp NOT NULL DEFAULT '0000-00-00 00:00:00',
    `log_received` float NOT NULL DEFAULT '0',
    `log_send` float NOT NULL DEFAULT '0',
PRIMARY KEY (`log_id`),
KEY `user_id` (`user_id`)
) ENGINE=InnoDB  DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;
</code>

''user'' dati
<code>
INSERT INTO `user` (
    `user_id`, `user_pass`, `user_mail`, `user_phone`,
    `user_online`, `user_enable`, `user_start_date`, `user_end_date`
)
VALUES (
    'test', '1234', 'mr.tumcpe@gmail.com',
    '+66815447514', 0, 1, '2012-01-01', '0000-00-00'
);
</code>

====== OpenVPN instalēšana un sertifikāta izveide ======

1. Instalējam OpenVPN
<code>apt-get install openvpn</code>

2. Izveidojam sertifikātu ģenerātora kopiju no OpenVPN dokumentācijas kataloga
<code>
cp -R /usr/share/doc/openvpn/examples/easy-rsa /etc/openvpn/.
cd /etc/openvpn/easy-rsa/2.0/
</code>

3. Labojam mainīgos sertifikāta vajadzībām
<code>
vi vars
</code>

Atrodam un labojam sekojošās rindiņas.
<code>
export KEY_COUNTRY="TH"
export KEY_PROVINCE="BKK"
export KEY_CITY="Bangkok"
export KEY_ORG="Chtunnel-VPN"
export KEY_EMAIL="support@chtunnel.com"
</code>

4. Saglabājam, aizveram redaktoru. Palaižam mainīgo scriptu un veco pārpalikumu tīrīšanas skriptu.
<code>
source ./vars
./clean-all
</code>

<code>
**************************************************************
  No /etc/openvpn/easy-rsa/2.0/openssl.cnf file could be found
  Further invocations will fail
**************************************************************
</code>



5. Izveidojam publiskos un privātos sertifikātus. Laižam skriptus pēc kārtas vienkārši atbildot ar ENTER vai YES. ''servername'' - veidojam sertifikātu serverim. ''clientname'' - veidojam sertifikātu klientam. ''servername'' un ''clientname'' ir vienkārši nosaukumi, kurus vēlāk vajadzēs izmantot atbilstošos konfigurācijas failos.
<code>
./build-ca
./build-key-server servername
./build-key clientname
./build-dh
mv keys /etc/openvpn/.
</code>

====== Konfigurējam lietotāju autorizāciju ar MySQL palīdzību ======

1. Izveidojam katalogu skriptiem '/etc/openvpn/script'
<code>
mkdir /etc/openvpn/script
cd /etc/openvpn/script
</code>

2. Izveidojam config.sh failu '/etc/openvpn/script/config.sh'
<code>
#!/bin/bash

##Dababase Server
HOST='localhost'

#Default port = 3306
PORT='3306'

#Username
USER='USERNAME'

#Password
PASS='PASSWORD'

#database name
DB='openvpn'
</code>

3. Izveidojam failu test_connect_db.sh pieslēguma testēšanai '/etc/openvpn/script/test_connect_db.sh'
<code>
#!/bin/bash

. /etc/openvpn/script/config.sh

##Test Authentication
username=$1
password=$2
user_id=$(mysql -h$HOST -P$PORT -u$USER -p$PASS $DB -sN -e "select user_id from user where user_id = '$username' AND user_pass = '$password' AND user_enable=1 AND user_start_date != user_end_date AND TO_DAYS(now()) >= TO_DAYS(user_start_date) AND (TO_DAYS(now()) <= TO_DAYS(user_end_date) OR user_end_date='0000-00-00')")

##Check user
[ "$user_id" != '' ] && [ "$user_id" = "$username" ] && echo "user : $username" && echo 'authentication ok.' && exit 0 || echo 'authentication failed.'; exit 1
</code>

4. Izveidojam skriptu login.sh '/etc/openvpn/script/login.sh'
<code>
#!/bin/bash

. /etc/openvpn/script/config.sh

##Authentication
user_id=$(mysql -h$HOST -P$PORT -u$USER -p$PASS $DB -sN -e "select user_id from user where user_id = '$username' AND user_pass = '$password' AND user_enable=1 AND user_start_date != user_end_date AND TO_DAYS(now()) >= TO_DAYS(user_start_date) AND (TO_DAYS(now()) <= TO_DAYS(user_end_date) OR user_end_date='0000-00-00')")

##Check user
[ "$user_id" != '' ] && [ "$user_id" = "$username" ] && echo "user : $username" && echo 'authentication ok.' && exit 0 || echo 'authentication failed.'; exit 1
</code>

5. izveidojam skriptu connect.sh '/etc/openvpn/script/connect.sh'
<code>
#!/bin/bash

. /etc/openvpn/script/config.sh

##insert data connection to table log
mysql -h$HOST -P$PORT -u$USER -p$PASS $DB -e "INSERT INTO log (log_id,user_id,log_trusted_ip,log_trusted_port,log_remote_ip,log_remote_port,log_start_time,log_end_time,log_received,log_send) VALUES(NULL,'$common_name','$trusted_ip','$trusted_port','$ifconfig_pool_remote_ip','$remote_port_1',now(),'0000-00-00 00:00:00','$bytes_received','$bytes_sent')"

##set status online to user connected
mysql -h$HOST -P$PORT -u$USER -p$PASS $DB -e "UPDATE user SET user_online=1 WHERE user_id='$common_name'"
</code>

6. Izveidojam skriptu disconnect.sh '/etc/openvpn/script/disconnect.sh'
<code>
#!/bin/bash

. /etc/openvpn/script/config.sh

##set status offline to user disconnected
mysql -h$HOST -P$PORT -u$USER -p$PASS $DB -e "UPDATE user SET user_online=0 WHERE user_id='$common_name'"

##insert data disconnected to table log
mysql -h$HOST -P$PORT -u$USER -p$PASS $DB -e "UPDATE log SET log_end_time=now(),log_received='$bytes_received',log_send='$bytes_sent' WHERE log_trusted_ip='$trusted_ip' AND log_trusted_port='$trusted_port' AND user_id='$common_name' AND log_end_time='0000-00-00 00:00:00'"
</code>

7. Veidojam OpenVPN konfigurācijas failus. OpenVPN serveris skanē .conf failus '/etc/openvpn' kad startējas. Katrai konfigurācijai tiek veidots atsevišķs process.

Veidojam failu server.conf ar pieslēgšanās portu 443 '/etc/openvpn/server.conf'
<code>

##protocol port
port 443
proto tcp
dev tun
 
##ip server client
server 10.4.0.0 255.255.255.0
 
##key
ca /etc/openvpn/keys/ca.crt
cert /etc/openvpn/keys/server.crt
key /etc/openvpn/keys/server.key
dh /etc/openvpn/keys/dh1024.pem
 
##option
persist-key
persist-tun
keepalive 5 60
reneg-sec 432000
 
##option authen.
comp-lzo
user nobody
#group nogroup
client-to-client
username-as-common-name
client-cert-not-required
auth-user-pass-verify /etc/openvpn/script/login.sh via-env
 
##push to client
max-clients 50
push "persist-key"
push "persist-tun"
push "redirect-gateway def1"
#push "explicit-exit-notify 1"
 
##DNS-Server
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
 
##script connect-disconnect
script-security 3 system
client-connect /etc/openvpn/script/connect.sh
client-disconnect /etc/openvpn/script/disconnect.sh
 
##log-status
status /var/log/openvpn/server.log
log-append /var/log/openvpn/openvpn.log
verb 3
</code>

8. Veidojam katalogu žurnālfailiem '/var/log/openvpn' un nomainām tiesības
<code>
mkdir /var/log/openvpn
touch /var/log/openvpn/openvpn.log
touch /var/log/openvpn/server.log
chmod -R 755 /etc/openvpn
chmod -R 755 /var/log/openvpn
</code>

9. Notestējam iespēju pieslēgties no skripta pie datu bāzes ar lietotāja vārdu ''test'' un paroli ''1234''
<code>
/etc/openvpn/script/test_connect_db.sh test 1234
# user : test
# authentication ok.
</code>

Ja autorizācija ir neveiksmīga - ''failed'' - pārbaudām lietotāja vārdus un paroles datubāzē vai konfigurācijas failā ''/etc/openvpn/script/config.sh''.

10. Startējam OpenVPN servisu.
<code>
/etc/init.d/openvpn start
</code>

====== Internets klientiem ======

1. Labojam '/etc/sysctl.conf'. Atrodam rindiņu:
<code>
#net.ipv4.ip_forward=1
</code>

Nomainam uz:
<code>
net.ipv4.ip_forward=1
</code>

2. Labojam '/etc/rc.local'. Pirms ''exit 0'' pievienojam sekojošas rindiņas:
<code>
echo "1" > /proc/sys/net/ipv4/ip_forward
echo "1" > /proc/sys/net/ipv4/ip_dynaddr
</code>


3. ''iptables'' veicam lokālās adreses pārveidi uz publisko
<code>
iptables -t nat -A POSTROUTING -s 10.4.0.0/24 -o eth0 -j MASQUERADE
</code>

====== OpenVPN Windows klienta puses konfigurēšana ======

Testēts: Windows XP; Windows 7.

1. Lejupielādējam OpenVPN klientu [http://openvpn.se/download.html] un instalējam.

2. Ja instalēšanas katalogs netika mainīts, tad katalogā ''C:\Program Files (x86)\OpenVPN\config'' iekopējam serverī izveidoto sertifikātu failus: ''ca.crt'', ''client.crt'', ''client.key''.

3. Veidojam pieslēguma konfigurācijas failu ''client.ovpn''. Paplašinājumam jābūt ''ovpn''.
<code>
client
dev tun
 
proto tcp
remote hostname_or_hostIP 443
 
nobind
auth-user-pass
reneg-sec 432000
resolv-retry infinite
 
ca ca.crt
comp-lzo
verb 1
</code>

4. Pārbaudām iespēju pieslēgties.

====== Papildinformācija ======

  * [[windows:openvpn-windows-instalacijas-ar-gatavu-konfiguraciju-izveide|OpenVPN Windows instalācijas ar gatavu konfigurāciju izveide]]

{{tag>Ubuntu_12.04 Ubuntu OpenVPN Linux}}
notes.from.lv

Lietotāja rīki

Vietnes rīki

Lapas rīki
